Overview
This article provides step-by-step instructions for mounting an ISO image to an HP server using the HTML5 Virtual Console.
Prerequisites
-
Access to the HP iLO (Integrated Lights-Out) management interface.
-
A workstation with the required ISO file available.
-
A supported web browser with HTML5 capabilities.
Steps to Mount ISO Using HTML5 Console
1. Launching the HTML5 Console
-
Log in to the HP iLO web interface.
-
Navigate to the Remote Console section.
-
Click on HTML5 Console to open the virtual console.
2. Mounting the ISO File
-
In the HTML5 Console, locate the disk icon at the top left-hand corner.
-
Click the CD/DVD option from the dropdown menu.
-
Click on the *Local .iso file button.
-
A file browser window will appear. Navigate to the location of the ISO file on your workstation.
-
Select the ISO file and click Open.
3. Verifying the Mount
-
If the ISO has been successfully mounted, a confirmation message will appear at the bottom right corner of the browser window.
4. Performing a Power Reset
-
Click on the three-bar menu at the top left-hand side of the HTML5 Console.
-
Select Power from the dropdown menu.
-
Click Reset to restart the server and boot from the mounted ISO.
Notes
-
Ensure the boot order is configured correctly in the BIOS/UEFI settings to boot from the virtual CD/DVD drive.
-
If the ISO does not appear after mounting, try remounting the file and resetting the server again.
Conclusion
Following these steps will allow you to successfully mount and boot an ISO using the HP iLO HTML5 Console. If issues persist, refer to HP documentation or contact support.